Mirror-suspension 200 x 100mm,
resilient with approx. 7,5kg

Self-adhesive hanging plate with a punched-out eyelet for mounting mirrors and glass. Also suitable for rooms with temporarily high humidity. The maximum load doubles when using two sheets, provided that the weight is distributed evenly and that it is hung horizontally.

Application: The surface to be bonded must be free of dust, dirt and grease. Position the sheet carefully, press down with a pressure of at least 15kg and repeat this process after 10 minutes. Leave for 24 hours until final adhesion is achieved.

Important information:
Maximum load does not increase with more than 2 sheets Glue only at room temperature (approx. 20°C). Use within 6 months of receipt Only stick to a smooth, flat and non-absorbent surface Not suitable for coatings such as cork, rubber, foils, hard fiber May react with paint, ink, acrylic, paint oils and similar materials.

Due to the variety of possible influences, we cannot assume any liability for adhesion to materials other than those specified here. On other surfaces and materials, the adhesive force is to be tested at your own risk. In this case we assume no liability.